- Reviews (0)
- Product Videos
The PPU 300 Standard controller variant is a highly configurable controller that can be customised to many different applications. It contains the functions required to protect and control a diesel generator, shaft generator, shore connection, or bus tie breaker, and their associated breakers.
You can reconfigure the onboard software for all of these applications, for example to change a genset controller to a shore connection controller, using the PICUS software utility. This makes the PPU 300 Standard controller a very flexible building block in your power system.
If you need extended controller functionality, you can order the PPU 300 Standard controller with a CODESYS PLC environment. For more information, see the PLC 300 CODESYS variant page.
Recommended I/O modules
|Slot 1||Slot 2||Slot 3||Slot 4||Slot 5||Slot 6||Slot 7|
|PSM3.1||ACM3.1||Blind module||Blind module||Blind module||Blind module||PCM3.1|
The table shows a 7-slot rack, but the controller is also available with a 4-slot rack. Modules PSM3.1, ACM3.1, and PCM3.1 are mandatory. If you add expansion module racks, each expansion rack must contain a PSM3.2 power supply module but does not need to contain other modules.
For general information about the PPU 300 controller range and its modular architecture, see the PPU 300 main page.
Other PPU 300 variants
Introduction to the display unit (DU 300)
Unboxing the display unit (DU 300)
Installing the Multi-line 300 controller
|PPU 300 Standard controller|
|Diesel Generator controller||yes|
|Engine and Generator protection||yes|
|Shaft generator controller||yes|
|Generator breaker control||yes|
|Generator control and protection||yes|
|Shore connection controller||yes|
|Shore connection breaker control||yes|
|Shore connection protection||yes|
|Bus tie breaker control||yes|
|Graphical based easy-to-use plant layout||yes|
|Additional I/O racks (9 racks)||yes|
|Ethernet Ring connection for Power management||yes|
|Redundant breaker feedback||yes|